Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
Pipe and fastening clamp Multifix steel/MVQ
PIPCLMP-RSGU-MVQ-GREY-W15MM-D10MM
Register now and access more than 125,000 products
The fastening clamp with rubber profile in grey
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against seepage
- Sound absorbing
- Good resistance to friction, alcohol, acids, and bases
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 15 mm |
Nominal diameter (D) | 10 mm |
Flange hole (d1) | M6 |
Distance centre of pipe to centre of hole (S) | 16.2 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | Silicone natural rubber |
Colour of rubber profile | Grey |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -60 to 170 °C |
Last viewed
Silicone acetate bathroom unit
Flexible connector For flexible LED strips
Feather key, low profile DIN 6885, steel, plain, shape A
3-pin socket 12V
Thread-rolling screw
Locking system, DPS
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hexagon bolt with shank
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)