Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
Pipe and fastening clamp Multifix steel/MVQ
PIPCLMP-RSGU-MVQ-GREY-W15MM-D12MM
Register now and access more than 125,000 products
The fastening clamp with rubber profile in grey
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against seepage
- Sound absorbing
- Good resistance to friction, alcohol, acids, and bases
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 15 mm |
Nominal diameter (D) | 12 mm |
Flange hole (d1) | M6 |
Distance centre of pipe to centre of hole (S) | 17.2 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | Silicone natural rubber |
Colour of rubber profile | Grey |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -60 to 170 °C |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Slotted raised countersunk head screw DIN 964, brass, nickel-plated (E2J)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Basic builder's bucket With zinc-plated handle
EPS profile thumbturn cylinder
Hexagon nut with clamping piece (non-metal insert) ISO 7040, steel 10, zinc-nickel-plated, silver (ZNSHL)
Drawer divider set, BASIC, 9 compartments
Side basket For SUB Flex floor unit extension
Jacket Planam Highline