Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
Pipe and fastening clamp Multifix steel/MVQ
PIPCLMP-RSGU-MVQ-GREY-W15MM-D16MM
Register now and access more than 125,000 products
The fastening clamp with rubber profile in grey
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against seepage
- Sound absorbing
- Good resistance to friction, alcohol, acids, and bases
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 15 mm |
Nominal diameter (D) | 16 mm |
Flange hole (d1) | M6 |
Distance centre of pipe to centre of hole (S) | 19.2 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | Silicone natural rubber |
Colour of rubber profile | Grey |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -60 to 170 °C |
Last viewed
Auger drill bit Longlife & Speed
Hexagon nut ISO 4032, A2-70 stainless steel, plain, for pressure container construction
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Threaded fitting
High-visibility parka Neon 3-in-1 class 3
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Concrete screw with pan head W-BS/S
Movement joint profile For movement joints, both flush and internal corner joints