Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
Pipe and fastening clamp Multifix steel/MVQ
PIPCLMP-RSGU-MVQ-GREY-W15MM-D6MM
Register now and access more than 125,000 products
The fastening clamp with rubber profile in grey
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against seepage
- Sound absorbing
- Good resistance to friction, alcohol, acids, and bases
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 15 mm |
Nominal diameter (D) | 6 mm |
Flange hole (d1) | M6 |
Distance centre of pipe to centre of hole (S) | 14.2 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | Silicone rubber |
Colour of rubber profile | Grey |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -60 to 170 °C |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Drill BM 13-XE
ZD 21 door handle, escutcheon fitting
Reel holder For SPS dry abrasive paper dispenser systems
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
SMART STEP EU+ HSCo twist drill bit DIN 338
Half-shell pin crimping insert
Cover caps For aluminium airline lashing rails
Perforated one-way runner for REDOSLIDE Z60-H/Z100-H and Z100-G sliding door fitting sets
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
