Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
Pipe and fastening clamp Multifix steel/MVQ
PIPCLMP-RSGU-MVQ-GREY-W20MM-D8MM
Register now and access more than 125,000 products
The fastening clamp with rubber profile in grey
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against seepage
- Sound absorbing
- Good resistance to friction, alcohol, acids, and bases
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 20 mm |
Nominal diameter (D) | 8 mm |
Flange hole (d1) | M8 |
Distance centre of pipe to centre of hole (S) | 18.5 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | Silicone natural rubber |
Colour of rubber profile | Grey |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -60 to 170 °C |
Last viewed
Label carrying system for identification rings
90° threaded elbow For Stapa-Gewinde-WESV steel-armoured pipe
Workshop scheduler, five rows DIN A4
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
EPS profile double cylinder
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Cetus work dungarees
Work coat
2C multi-purpose anchor SHARK® TWIST One anchor. Eight knots.
Safety boots, S3