Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPCLMP-RSGU-RBR-W5/A4-22/15
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 15 mm |
Nominal diameter (D) | 22 mm |
Flange hole (d1) | M6 |
Distance centre of pipe to centre of hole (S) | 22.2 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Sealing washers DIN 7603, steel, plain, shape A
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Twist drill bit HSS DIN 338 type RN 130°
Separating rail for multiple separation For 60 x 60 mm and 60 x 90 mm cable routing conduits
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, steel 10.9, plain
Hand cleaner N-Active
Work trousers
Low-cut safety shoes S1 ESD
Pneumatic 2C application gun WIT
1/4 inch socket TX Plus
