Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPCLMP-RSGU-RBR-W5/A4-25/20
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 20 mm |
Nominal diameter (D) | 25 mm |
Flange hole (d1) | M8 |
Distance centre of pipe to centre of hole (S) | 27 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Threaded piece
Split pin ISO 1234 A2 stainless steel
Neon high-visibility winter trousers, class 2
Cylindrical grooved pin with chamfer
Ring screw With metric thread, zinc-plated steel, blue passivated (A2K)
Twist drill bit HSCo DIN 338 type RN oxide
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Twist drill bit HSS DIN 338 type RN 130°