Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPCLMP-RSGU-RBR-W5/A4-55/20
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 20 mm |
Nominal diameter (D) | 55 mm |
Flange hole (d1) | M8 |
Distance centre of pipe to centre of hole (S) | 42 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Mounting screw AS W.TEC® DUCTING CLAMP - Heavy-duty series
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Sleeve, with solder connection on both sides EN1254, copper, 5270
Adjustable straight sealing cone reducer fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Hexagonal bolt, with thread to head and fine thread
Straight bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Countersunk screw with hexagon socket head ISO 10642, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)
Jacket Planam Tristep
10-mm auto-lock quick-action drill chuck For cordless drill driver BS 12-A Multi