Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPCLMP-RUBBER RSGU 38/25 W5/A4
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 25 mm |
Nominal diameter (D) | 38 mm |
Flange hole (d1) | M10 |
Distance centre of pipe to centre of hole (S) | 36.5 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Blind rivet/rivet nuts assortment, 75 years of WÜRTH 925 pieces in system case 8.4.1.
Hexagonal bolt with thread up to the head
Hexagonal nut with flange EN 1661, steel 10, zinc-plated, blue passivated (A2K)
Abrasive fleece matting body
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
Protective sleeves GPN 200, shape A Polyethylene (PE-LD), natural
Cordless drill driver ABS 18 COMPACT M-CUBE Special Edition
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Washer shape M