Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPECLIPS W.RUBBER RSGU 64/20 W5/A4
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 20 mm |
Nominal diameter (D) | 64 mm |
Flange hole (d1) | M8 |
Distance centre of pipe to centre of hole (S) | 46.5 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Hexagonal bolt with shank and fine thread
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain
Soft wax
Nitrile protective glove Ansell HyFlex® 11-100
Knob cylinder 3KS
Hygienic design ball-head screw
Cut protection glove
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled