Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPECLIPS W.RUBBER RSGU54/20 W5/A4
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 20 mm |
Nominal diameter (D) | 54 mm |
Flange hole (d1) | M8 |
Distance centre of pipe to centre of hole (S) | 41.5 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Winding wire For wrapping mineral wool insulation and intumescent strips to meet fire protection requirements
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers
Reducible mud flap
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Slotted flat-head screw DIN 85, steel 4.8, nickel-plated (E2J)
HVAC wedge lock washer For high-strength structural bolting assemblies
WOOD CONNECTOR WC-DT-D
Circlip, shaft DIN 983, steel, plain, shape AK
W-RD plastic frame anchor Without collar in natural colour. Without approval