Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Pipe and fastening clamp Multifix A4/EPDM
PIPECLIPSW.RUBBER RSGU 42/25 W5/A4
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine bases, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 25 mm |
Nominal diameter (D) | 42 mm |
Flange hole (d1) | M10 |
Distance centre of pipe to centre of hole (S) | 38.5 mm |
Standards | DIN 3016 |
Material | Stainless steel A4 |
Surface | Plain |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Nature work dungarees
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Work jacket
Work shirt, long-sleeved
Drilling screw, hexagon head with sealing washer piasta®
Work polo shirt Daiber men's organic workwear polo JN874
WLA 18.0 cordless LED work lamp With two high-performance LED arrays
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Rust remover Rost-Off
Tungsten carbide bur Klingspor HF 100 M