Welcome to Würth Aerospace Solutions For trade customers only

Pipe sleeve SML/plastic

Pipe sleeve SML/plastic
PIPSLEV-SML-PLA-50MM

Art.-no. 0893304009
EAN 4050641883629

Prices for customers after login
Pipe sleeve SML/plastic

Art.-no. 0893304009

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Collar for mixed installations, cast metal (SML)/plastic
  • Easy installation, set provides a solution and includes all installation parts

  • Possible to transition from cast-iron pipes to plastic pipes directly under the ceiling

  • No duct lining necessary

  • Easy to wrap around SML connectors with the strip during installation

  • Pipe diameter of plastic pipes 50 mm, 75 mm, 110 mm

  • Zero spacing from Flexen rock wool, Flexen synthetic rubber and fire protection collar type RK I and Endless

  • Entirely maintenance-free

  • Intumescent ceiling strip is self-adhesive

  • Seals off fire and smoke


Scope of delivery


Sleeve consisting of: Sheet metal housing, size 50, 75 or 110 mm including matching inlay of intumescent strip


  • 1x size 50 mm: Dia. 102 mm, 125 mm

  • 1x size 75 mm: Dia. 140 mm, 155 mm

  • 1 x size 110 mm: Dia. 155 mm, 155 mm
Proof of Performance
  • Ceiling ducts R 90 Z-19.53-2402

  • Sound test report P-BA 18/2009
Notice
  • 3 cm distance from cable partitions possible

  • Please observe the additional instructions in the installation instructions and the approval
Application area

Place the cover strip, including the sound-absorbing pad, around the casting tube

Seal the remaining gap with fire retardant cement

Place the intumescent strip around the confix connector

Place the sheet metal housing around the connector and secure it with the metal tension band

Adjust the insulation to 250 mm in height on the cast tube and secure with the aluminium tape and winding wire

Affix ID plate

  • Ceiling ducts R 90 Z-19.53-2402

  • Sound test report P-BA 18/2009
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For use in system [G3]


Pipe partition SML/plastic



  • For ceiling ducts in solid ceilings made from concrete or aerated concrete that are ≥ 150 mm

  • Fire resistance class R 90/R 120 in accordance with DIN 4102 or EI 90/120 in accordance with EN 13501

  • For risers made of non-combustible cast iron pipes (SML) ≤ DN 125 (outside dia. 135 mm)

  • Also suitable for buildings with stricter sound protection requirements pursuant to VDI Guideline 4100

DN nominal width

DN 50

Internal diameter

60 mm

Outer diameter

110 mm

Height

120 mm

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Assembly set For SML/plastic pipe partitions

ASMBY-SET-F.PIPSLEV-SML-PLA

The scope of delivery includes two marking plates, one approval and one set of installation instructions
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information