Plastic adhesion promoter SR

Name: Plastic adhesion promoter SR
Brand: Würth
SKU: 5867000125

Plastic adhesion promoter SR
PRIM-PLA-PRIMER-SR-400ML

Art.-no. 5867000125

EAN 4050382242587

All versions

Specification

Plastic adhesion promoter for use in spot repairs of plastic parts.

Even application rate

Even, thin moistening of the spot area

High yield due to constant atomisation pressure

Excellent adhesion properties

Dries quickly

Notice

Not suitable for PE, Styrofoam and synthetic resin-coated surfaces. After use, turn the can upside down and spray until the nozzle is empty.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For plastic parts such as PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TPU, PPO, PBT, PUR soft foam, UP-GF plastics.

Instructions

Lightly roughen the surface to be treated and clean thoroughly with silicone remover. The surface must be clean, dry and free from grease. Shake the can well for approx. 2 minutes before use. Apply one thin (1–2 µm) spray pass at a distance of approx. 20–30 cm. Can be painted after approx. 10 minutes with all commercially available top-coat systems.

Technical information

Contents	400 ml
Chemical basis	Resin
Colour	Transparent
Density	0.75 g/cm³
Density conditions	at 20°C
VOC concentration (CH)	728 g/l
Min. coating thickness	1 µm
Max. coating thickness	2 µm
Min. spraying distance	20 cm
Max. spraying distance	30 cm
Unleaded	Yes
Shelf life from production	36 Month
Acid-free	Yes
Chlorine-free	Yes
Silicone-free	Yes
Water-soluble	Yes
Conditions for drying time	at 20°C
Min. drying time	15 min
Max. drying time	20 min
Max. proportion of solids	2.3 %

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Spraymaster spray can attachment

ATTCH-SPRCAN-F.PNTSPR-SPRAYMASTER

Art.-no. 0891090

The practical attachment for your spray cans

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).