Plastic anchor with screw W-UR 10, A4 stainless steel
Plastic frame anchor, W-UR F 10, stain. steel, A4
ANC-(W-URF10)-PLA-A4-WS13-30-10X100
Art.-no. 0912810702
EAN 4046778823164
Register now and access more than 125,000 products
Anchoring by friction lock between the anchor body and the support
Anchor sleeve made of high-quality polyamide
Pass-through mounting
Immediate load capacity, no waiting
Virtually no movement of the anchor sleeve
- Low insertion torque of the frame screw
- Slight spreading of the anchor
High-strength screw lock
High load-bearing capacities
Expands in four directions
Improved force transmission in hollow and solid building materials
Even, continuous load distribution across the entire expansion area
Hammer-in stop prevents premature expansion of the anchor during installation
Reduced installation labour
The anchor sleeve and the special screw are pre-assembled
Removes the need for an additional U-washer and prevents contact corrosion
Installation temperatures
- Anchor base temperature: ≥-20 °C
- Anchor sleeve temperature: ≥0 °C
- Drilling perforated and hollow blocks with a rotary tool (without impact mechanism)
- For anchoring in solid bricks and solid sand-lime bricks, we recommend that you perform pull-out tests due to the differences in brick manufacturing.
- Drill cuttings must be removed from the drill hole
European technical approval
Multiple connection of non-load-bearing systems in concrete and masonry
European technical approval ETA-08/0190
Fire resistance
Concrete and masonry
Concrete
Tension load and transverse load, R30, R60, R90, R120 (according to technical report TR 020)
Masonry
- Tensile load: F30 (solid sand-lime brick, solid brick, hollow sand-lime brick)
- Transverse load: F30, F60, F90, F120 (vertically perforated brick, hollow sand-lime brick, solid brick, autoclaved aerated concrete)
Datasheets(X)
CAD data (available after login)
- The anchor has European technical approval for use in multiple connections of non-load-bearing systems (e.g. frames, suspended ceilings etc.).
- Can be anchored in the following anchor bases: Standard concrete, masonry walls (solid brick, solid sand-lime brick, perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and solid lightweight concrete blocks, concrete bricks), autoclaved aerated concrete
- The stainless steel screw can be used outdoors, in industrial environments and in coastal areas
- Suitable for attaching frames, ceilings and ceiling substructures (made of wood or steel), wooden beams, wooden slats, metal brackets, metal rails, suspended ceilings, cable ducts, angle brackets, profiles, wall-mounted cabinets, shelves etc.
Anchor diameter | 10 mm |
Anchor length (l) | 100 mm |
Max. attachment height (t fix) | 30 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Through-hole in the component to be connected (d f) | 10.5 mm |
Material of screw | Stainless steel A4 |
Internal drive | AW40 |
Surface of the screw | Plain |
Head type | Countersunk head |
Drill hole depth (h 1) | 80 mm |
Approval | ETA-08/0190 |
Type description | W-UR F 10 A4, hexagonal bolt |
Last viewed
T-shirt Job+ women's
Pipe protective cap GPN 250
Face seal Sundström R06-4404
Slip-in bracket With 2C handle
ELMO® speed screws Zinc-plated steel, blue, RW slot drive
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hi-vis work T-shirt Asatex Prevent® Trendline
S1P safety sandal Elten Anthony Easy ESD
Chuck with lock nut for HES 512 D rivet nut setting pliers
Connector, pneumatic