Plastic care

Name: Plastic care
Brand: Würth
SKU: 0893477

Plastic care
PLACARECOMPD-1000ML

Art.-no. 0893477

EAN 4024835620666

All versions

Similar products

Prices for customers after login

Plastic care

Art.-no. 0893477

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

High-quality care wax for all outdoor plastic and rubber parts

Excellent colour refreshing and silk-matt gloss

Ideal for matt, whitened plastic parts

Well-kept appearance, looks good as new

Provide permanent care and protection against environmental influences

Plastic and rubber parts remain supple

Protects against material brittling and whitening

Water and dirt-repellent

Care wax

High yield, economical to use

Simple, targeted use

No run-off in rain

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For unpainted plastic bumpers, exterior mirrors, panel parts, spoilers, tyre walls, rubber seals etc.

Instructions

Thorough pre-cleaning with Absobon basic vehicle cleaner. Apply an even coat of the plastic care with a sponge or cloth and work into the roughest surface texture. We recommend using a rough sponge for extremely faded parts. The gloss effect can be enhanced even more by simply polishing the surface. Protect from frost.

Contents	1 l
Smell/fragrance	Lemon
Colour	White
Chemical basis	Mineral oil
Density/conditions	0.81 g/cm³ / at 20°C
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.