Plastic frame anchor W-UR F 10, stainless steel A4
Plastic frame anchor, W-UR F 10, sst, A4
ANC-(W-URF10)-PLA-A4-WS13-30-10X100
ZEBRA
Register now and access more than 125,000 products
Anchorage via friction locking between wall plug body and anchoring base
Wall plug body made of high-quality polyamide
Push-through installation
Immediate load-bearing capacity — no waiting
Virtually no movement of the wall plug body
- Low insertion torque of plug screw
- "Slight" spreading of the anchor
Very strong twist lock
High load-bearing capacities
Spreads in four directions
Improved force transmission in solid and hollow construction materials
Even, continuous load distribution across the entire expansion area
The hammer-in stop prevents premature expansion of the anchor during installation
Less installation work
Wall plug body and special screw are pre-assembled
Saves an additional U-washer and prevents contact corrosion
Installation temperatures
- Temperature of anchoring base: ≥ -20°C
- Temperature of wall plug body: ≥ 0°C
- Drill perforated and hollow blocks in rotating gear (without impact mechanism)
- For anchoring in solid brick and solid sand-lime brick, we recommend that you perform pull-out tests due to the differences in brick manufacturing.
- Drill cuttings must be removed from the drill hole
European Technical Approval
Multiple attachment of non-load-bearing systems in concrete and masonry
European Technical Approval ETA-08/0190
Fire resistance
Concrete and masonry
Concrete
Tensile and transverse loads, R30, R60, R90, R120 (in accordance with Technical Report TR 020)
Masonry
- Tensile load: F30 (solid sand-lime brick, solid brick, hollow sand-lime brick)
- Transverse load: F30, F60, F90, F120 (vertically perforated brick, hollow sand-lime brick, solid brick, aerated concrete)
Datasheets(X)
CAD data (available after login)
- The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. façades, suspended ceilings etc.)
- Can be anchored in the following anchoring bases: Standard concrete, masonry walls (solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and solid blocks made of lightweight concrete, concrete bricks) aerated concrete
- The stainless steel screw can be used outdoors, in industrial atmospheres and in coastal areas
- Suitable for attaching façade, ceiling and roof substructures (made of wood or steel), wooden beams, wooden slats, metal brackets, metal rails, suspended ceilings, cable conduits, angle brackets, profiles, wall-mounted cabinets, shelves etc.
Anchor diameter | 10 mm |
Anchor length (l) | 100 mm |
Max. attachment height (t fix) | 30 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Through-hole in the component to be connected (d f) | 10.5 mm |
Material of screw | Stainless steel A4 |
Internal drive | AW40 |
Surface of the screw | Plain |
Head type | Countersunk head |
Drill hole depth (h 1) | 80 mm |
Approval | ETA-08/0190 |
Type description | W-UR F 10 A4, hexagonal bolt |
Last viewed
Cable grommet with closed membrane, PVC
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Sweat band Sundström R06-0203
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Jacket Planam Highline
Transport and base plate
Low-cut safety shoes, S1P
Hanging basket 90° For floor unit full-extension slide VS SUB Side, body width 150 mm
System insert, foam 4.4.1 with long crimping tool grip
System box