Plastic frame anchor W-UR F 10, stainless steel A4
Plastic frame anchor, W-UR F 10, sst, A4
ANC-(W-URF10)-PLA-A4-WS13-45-10X115
ZEBRA
Register now and access more than 125,000 products
Anchorage via friction locking between wall plug body and anchoring base
Wall plug body made of high-quality polyamide
Push-through installation
Immediate load-bearing capacity — no waiting
Virtually no movement of the wall plug body
- Low insertion torque of plug screw
- "Slight" spreading of the anchor
Very strong twist lock
High load-bearing capacities
Spreads in four directions
Improved force transmission in solid and hollow construction materials
Even, continuous load distribution across the entire expansion area
The hammer-in stop prevents premature expansion of the anchor during installation
Less installation work
Wall plug body and special screw are pre-assembled
Saves an additional U-washer and prevents contact corrosion
Installation temperatures
- Temperature of anchoring base: ≥ -20°C
- Temperature of wall plug body: ≥ 0°C
- Drill perforated and hollow blocks in rotating gear (without impact mechanism)
- For anchoring in solid brick and solid sand-lime brick, we recommend that you perform pull-out tests due to the differences in brick manufacturing.
- Drill cuttings must be removed from the drill hole
European Technical Approval
Multiple attachment of non-load-bearing systems in concrete and masonry
European Technical Approval ETA-08/0190
Fire resistance
Concrete and masonry
Concrete
Tensile and transverse loads, R30, R60, R90, R120 (in accordance with Technical Report TR 020)
Masonry
- Tensile load: F30 (solid sand-lime brick, solid brick, hollow sand-lime brick)
- Transverse load: F30, F60, F90, F120 (vertically perforated brick, hollow sand-lime brick, solid brick, aerated concrete)
Datasheets(X)
CAD data (available after login)
- The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. façades, suspended ceilings etc.)
- Can be anchored in the following anchoring bases: Standard concrete, masonry walls (solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and solid blocks made of lightweight concrete, concrete bricks) aerated concrete
- The stainless steel screw can be used outdoors, in industrial atmospheres and in coastal areas
- Suitable for attaching façade, ceiling and roof substructures (made of wood or steel), wooden beams, wooden slats, metal brackets, metal rails, suspended ceilings, cable conduits, angle brackets, profiles, wall-mounted cabinets, shelves etc.
Anchor diameter | 10 mm |
Anchor length (l) | 115 mm |
Max. attachment height (t fix) | 45 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Through-hole in the component to be connected (d f) | 10.5 mm |
Material of screw | Stainless steel A4 |
Internal drive | AW40 |
Surface of the screw | Plain |
Head type | Countersunk head |
Drill hole depth (h 1) | 80 mm |
Approval | ETA-08/0190 |
Type description | W-UR F 10 A4, hexagonal bolt |
Last viewed
Abrasive cloth roll Klingspor KL 385 JF
Divider set, flat for workshop trolleys in system dimension 8.4
Steering roller
VLB 100 3D door hinge
Half screw connection EN1254, copper, 5359G
Wood screw, DIN 95 brass Raised countersunk head, slotted
Cetus overall
Abrasive cloth roll Klingspor KL 385 JF
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Rivet nut with flat head and knurled shank