Plastic heat pump pipe
Plastic pipe double line with protective pipe
PLAPIP-HEATPUMP-(2X32/125)-DN25X27M
Register now and access more than 125,000 products
- Quick and easy installation thanks to the combination of service and empty pipes
- Little waste, because the product can be ordered by the metre
- Small external diameter means less excavation, narrow ditches and smaller wall openings
- Marked pipe to prevent confusion between supply and return
- Two empty pipes for routing the power and control lines
- Narrow bending radius
- Flexible, parallel corrugated jacket pipe with high mechanical resistance
Datasheets(X)
DN nominal width | DN 25 |
Length | 27 m |
Bending radius | 0.5 m |
Material of pipe | Polyethylene polymerised |
Pipe diameter | 32 mm |
Pipe-wall thickness | 2.9 mm |
Min./max. operating temperature | 0 to 95 °C |
Operating pressure max./conditions | 6.6 bar / at 95°C |
Material of jacket pipe | HDPE - High density polyethylene |
Outer diameter of jacket pipe | 125 mm |
Min. processing temperature | 5 °C |
Nominal width DN of conduit | 24 mm |
Nominal width DN of conduit 2 | 20 mm |
Material of insulation | Polyethylene - PE |
Heat conductance λ insulation / conditions | 0.04 W/(m*K) / at 40°C average temperature, in accordance with DIN EN ISO 8497/DIN 52613 |
Max. water absorption (%) | 1 % |
Transport dimension | 179 x 50 x 179 cm |
Weight | 48.6 kg |
Last viewed
Steel door split spindle 8 mm with M12 threaded roller
HSS-Co8 end mill, short, centre-cutting DIN 844K
ASSY® 4 WW CSMR 60 timber screw Steel zinc plated partial thread countersunk milling head
Work vest
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Low-cut safety shoes, S2
Weld-on hook QC 8
Work dungarees
Twist drill bit, metal Ruko DIN 338 HSS-G TiN 130°