Plastic heat pump pipe
Plastic pipe double line with protective pipe
PLAPIP-HEATPUMP-(2X32/125)-DN25X30M
Register now and access more than 125,000 products
- Quick and easy installation thanks to the combination of service and empty pipes
- Little waste, because the product can be ordered by the metre
- Small external diameter means less excavation, narrow ditches and smaller wall openings
- Marked pipe to prevent confusion between supply and return
- Two empty pipes for routing the power and control lines
- Narrow bending radius
- Flexible, parallel corrugated jacket pipe with high mechanical resistance
Datasheets(X)
DN nominal width | DN 25 |
Length | 30 m |
Bending radius | 0.5 m |
Material of pipe | Polyethylene polymerised |
Pipe diameter | 32 mm |
Pipe-wall thickness | 2.9 mm |
Min./max. operating temperature | 0 to 95 °C |
Operating pressure max./conditions | 6.6 bar / at 95°C |
Material of jacket pipe | HDPE - High density polyethylene |
Outer diameter of jacket pipe | 125 mm |
Min. processing temperature | 5 °C |
Nominal width DN of conduit | 24 mm |
Nominal width DN of conduit 2 | 20 mm |
Material of insulation | Polyethylene - PE |
Heat conductance λ insulation / conditions | 0.04 W/(m*K) / at 40°C average temperature, in accordance with DIN EN ISO 8497/DIN 52613 |
Max. water absorption (%) | 1 % |
Transport dimension | 179 x 50 x 179 cm |
Weight | 54.0 kg |
Last viewed
Reducing sleeve, with solder connection on both sides EN1254, copper, 5240
Shoe accessories
DUO-S impact drill bit with straight shank
Hexagon nut with clamping piece and washer
Rib disk
Rib disk
Countersunk rivet
Eye bolt DIN 444, A2 stainless steel, plain, shape B
Roof railing system tub short
Three prong knob with perforated blank bushing Full hub