Plastic heat pump pipe
Plastic pipe double line with protective pipe
PLAPIP-HEATPUMP-(2X40/145)-DN32X35M
Register now and access more than 125,000 products
- Quick and easy installation thanks to the combination of service and empty pipes
- Little waste, because the product can be ordered by the metre
- Small external diameter means less excavation, narrow ditches and smaller wall openings
- Marked pipe to prevent confusion between supply and return
- Two empty pipes for routing the power and control lines
- Narrow bending radius
- Flexible, parallel corrugated jacket pipe with high mechanical resistance
Datasheets(X)
DN nominal width | DN 32 |
Length | 35 m |
Bending radius | 0.6 m |
Material of pipe | Polyethylene polymerised |
Pipe diameter | 40 mm |
Pipe-wall thickness | 3.7 mm |
Min./max. operating temperature | 0 to 95 °C |
Operating pressure max./conditions | 6.6 bar / at 95°C |
Material of jacket pipe | HDPE - High density polyethylene |
Outer diameter of jacket pipe | 145 mm |
Min. processing temperature | 5 °C |
Nominal width DN of conduit | 24 mm |
Nominal width DN of conduit 2 | 20 mm |
Material of insulation | Polyethylene - PE |
Heat conductance λ insulation / conditions | 0.04 W/(m*K) / at 40°C average temperature, in accordance with DIN EN ISO 8497/DIN 52613 |
Max. water absorption (%) | 1 % |
Transport dimension | 187 x 58 x 187 cm |
Weight | 73.5 kg |
Last viewed
S1PL safety shoe New Balance Elite Lite Womens
Work dungarees
Rotary shaft sealing ring DIN 3760, plastic NBR, shape A
EPS profile thumbturn cylinder
Carbide burr multi-performance TiAlSiN
Helical insert W.TEC® INSERT COIL Screw Grip
Polo shirt Job+
Additional function EPS
Reserve taper grooved dowel pin ISO 8741 steel plain
S1PL safety shoe Uvex1 XCraft 6808