Plastic heat pump pipe
Plastic pipe double line with protective pipe
PLAPIP-HEATPUMP-(2X40/145)-DN32X50M
Register now and access more than 125,000 products
- Quick and easy installation thanks to the combination of service and empty pipes
- Little waste, because the product can be ordered by the metre
- Small external diameter means less excavation, narrow ditches and smaller wall openings
- Marked pipe to prevent confusion between supply and return
- Two empty pipes for routing the power and control lines
- Narrow bending radius
- Flexible, parallel corrugated jacket pipe with high mechanical resistance
Datasheets(X)
DN nominal width | DN 32 |
Length | 50 m |
Bending radius | 0.6 m |
Material of pipe | Polyethylene polymerised |
Pipe diameter | 40 mm |
Pipe-wall thickness | 3.7 mm |
Min./max. operating temperature | 0 to 95 °C |
Operating pressure max./conditions | 6.6 bar / at 95°C |
Material of jacket pipe | HDPE - High density polyethylene |
Outer diameter of jacket pipe | 145 mm |
Min. processing temperature | 5 °C |
Nominal width DN of conduit | 24 mm |
Nominal width DN of conduit 2 | 20 mm |
Material of insulation | Polyethylene - PE |
Heat conductance λ insulation / conditions | 0.04 W/(m*K) / at 40°C average temperature, in accordance with DIN EN ISO 8497/DIN 52613 |
Max. water absorption (%) | 1 % |
Transport dimension | 187 x 87 x 187 cm |
Weight | 105 kg |
Last viewed
Washer shape M
Hexagonal bolt with thread up to the head
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with metallic sealing edge, shape B
Twist drill bit HSCo DIN 1869 R1 type RN
Extension, brass Metric according to EN 60423
Straight screw fitting, metric, PA6 MOD BS SGA
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Crimp cable lug, pin shape DIN 46230 and similar
Hexagonal bolt with shank and fine thread
Logo sweat jacket