Plastic heat pump pipe
Plastic pipe double line with protective pipe
PLAPIP-HEATPUMP-(2X50/160)-DN40X33M
Register now and access more than 125,000 products
- Quick and easy installation thanks to the combination of service and empty pipes
- Little waste, because the product can be ordered by the metre
- Small external diameter means less excavation, narrow ditches and smaller wall openings
- Marked pipe to prevent confusion between supply and return
- Two empty pipes for routing the power and control lines
- Narrow bending radius
- Flexible, parallel corrugated jacket pipe with high mechanical resistance
Datasheets(X)
DN nominal width | DN 40 |
Length | 33 m |
Bending radius | 0.65 m |
Material of pipe | Polyethylene polymerised |
Pipe diameter | 50 mm |
Pipe-wall thickness | 4.6 mm |
Min./max. operating temperature | 0 to 95 °C |
Operating pressure max./conditions | 6.6 bar / at 95°C |
Material of jacket pipe | HDPE - High density polyethylene |
Outer diameter of jacket pipe | 160 mm |
Min. processing temperature | 5 °C |
Nominal width DN of conduit | 24 mm |
Nominal width DN of conduit 2 | 20 mm |
Material of insulation | Polyethylene - PE |
Heat conductance λ insulation / conditions | 0.04 W/(m*K) / at 40°C average temperature, in accordance with DIN EN ISO 8497/DIN 52613 |
Max. water absorption (%) | 1 % |
Transport dimension | 193 x 80 x 193 cm |
Weight | 104 kg |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Double cylinder S5 locking system
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Screw cap W.TEC® COVER CAP WP 800 For metric threads
S3L safety shoe Elten Joran Boa Low ESD
Safety boots S3
Disposable protective suit uvex 4B
Hexagonal bolt with thread up to the head
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Work dungarees