Plastic heat pump pipe
Plastic pipe double line with protective pipe
PLAPIP-HEATPUMP-(2X50/160)-DN40X35M
Register now and access more than 125,000 products
- Quick and easy installation thanks to the combination of service and empty pipes
- Little waste, because the product can be ordered by the metre
- Small external diameter means less excavation, narrow ditches and smaller wall openings
- Marked pipe to prevent confusion between supply and return
- Two empty pipes for routing the power and control lines
- Narrow bending radius
- Flexible, parallel corrugated jacket pipe with high mechanical resistance
Datasheets(X)
DN nominal width | DN 40 |
Length | 35 m |
Bending radius | 0.65 m |
Material of pipe | Polyethylene polymerised |
Pipe diameter | 50 mm |
Pipe-wall thickness | 4.6 mm |
Min./max. operating temperature | 0 to 95 °C |
Operating pressure max./conditions | 6.6 bar / at 95°C |
Material of jacket pipe | HDPE - High density polyethylene |
Outer diameter of jacket pipe | 160 mm |
Min. processing temperature | 5 °C |
Nominal width DN of conduit | 24 mm |
Nominal width DN of conduit 2 | 20 mm |
Material of insulation | Polyethylene - PE |
Heat conductance λ insulation / conditions | 0.04 W/(m*K) / at 40°C average temperature, in accordance with DIN EN ISO 8497/DIN 52613 |
Max. water absorption (%) | 1 % |
Transport dimension | 193 x 80 x 193 cm |
Weight | 110.3 kg |
Last viewed
Fastener
Hexagon nut, high profile
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Work trousers
Shim ring DIN 988, steel, plain
Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
Charger AL 50-LI
Basic trousers
Thread cutter for TIME-SERT® Made of HSS
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain