Welcome to Würth Aerospace Solutions For trade customers only

Plastic multi-purpose anchor SHARK® Pro

Plastic multi-purpose anchor Shark Pro
DWL-(SHARK PRO)-PLA-12X66
ZEBRA-SHARK

Art.-no. 590621266
EAN 4065746601962

Prices for customers after login
Plastic multi-purpose anchor SHARK® Pro

Art.-no. 590621266

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

The most versatile plastic anchor. Knots into cavities, expands in solid materials

Ensures knotting in all cavities and expansion in all solid materials


  • Anti-rotation device or twist lock prevents turning in the drill hole

  • Patented anchor head causes knotting of the anchor shaft when the screw is screwed in


Quick and easy installation


Low installation torque and high fixed torque



Suitable for pre-positioned and push-through installation


  • Fold-down anchor collar

  • The hammer-in stop prevents premature expansion during push-through installation


Resistant to rotting, weathering and ageing


  • UV resistant < 6 weeks

  • Made from high-quality polyamide (nylon)


Halogen- and silicone-free



Thermally stable from -40°C to +100°C

Notice

For mounting, we recommend the ASSY-D plug screw

Application area
Autoclaved aerated (cellular) concrete
Vertically perforated brick
Plasterboard
Concrete
Hollow calcium silicate block
Drill the hole
Remove drill cuttings from drill hole
Install anchor
Screw in screw until flush
Drill the hole
Install anchor
Screw in screw until flush
Drill the hole
Install anchor
Screw in screw until flush
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Universal plastic anchor


In concrete, solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, aerated concrete, plasterboard, gypsum fibreboard



Suitable for attaching


Wardrobes, curtain rails, wall shelves, lightweight wall cupboards, picture frames, mirrors, lamps, cable ducts, cable clamps, electrical switches, wash basins, towel rails, signs, motion detectors, etc.



For attaching components in conjunction with a wood or chipboard screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)


Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Anchor diameter

12 mm

Material

PA - Polyamide

Colour

Anthracite

Anchor length (l)

66 mm

Nominal drill-bit diameter (d 0)

12 mm

Drill hole depth (t)

75 mm

Edge clearance (a r)

150 mm

Embedding depth (h s)

65 mm

Min./max. required screw diameter

8-10 mm

Required screw length (l s)

Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter

Type description

SHARK PRO

Min./max. temperature conditions

-40 to 100 °C

Performance data
Anchor diameter [mm] 5 6 8 10 12 14
Recommended loads1) Concrete ≥ B25; C20/25 Frec [kN] 0,5 0,9 1,1 1,9 2,4 2,8
Solid bricks ≥ Mz12; KS12 0,3 0,5 0,7 1,4 1,7 1,7
Vertically perforated brick ≥ Hlz122) 0,1 0,2 0,2 0,3 0,3 0,4
Hollow sand-lime bricks ≥ KSL122) 0,2 0,4 0,6 1,0 1,0 1,0
Aerated concrete PB2; PP22) 0,05 0,1 0,1 0,15 0,2 0,35
Gypsum plasterboard d = 12.5 mm
2)
0,1 0,1 0,1 0,1 0,1 0,1
Gypsum plasterboard d = 25 mm
2)
0,15 0,15 0,15 0,15 0,15 0,15
Gypsum fibreboard (Fermacell)2) 0,2 0,2 0,2 0,25 0,25 0,25
Other installation recommendations:
Edge distance ar ≥ [mm] 30 35 40 50 65 80
Screw diameter in panel building materials dscr2 [mm] 3 4 4,5 6 8 10
Screw length ls [mm] Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
1) These values apply when using wood screws with the largest screw diameter.
2) The drill hole is to be made with a rotary drill (without impacting or hammering).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information