Plastic sheet metal nut, type 1
Plastic sheet-metal nut, type 1
MP-OPEL-NUT-PLA-GREEN
Register now and access more than 125,000 products
Extremely secure attachment
To obtain optimal assembly conditions, the screw thread should be at least as long as the height of the plastic nut.
Datasheets(X)
- Attachment of sheet metal with a thickness of 0.5–5.0 mm
- Screwing with plastic-compatible screws e.g. WÜPLAST®
Suitable for screw | Diameter 5.0 mm |
Length | 16 mm |
Width | 12 mm |
Min./max. attachment thickness | 1.5-2 mm |
Distance between centre of hole and edge | 8.5 mm |
Drill hole diameter | 7 mm |
Material | PP - Polypropylene |
Colour | Green |
Corresponds to original spare part number | 1235884 |
Corresponds to original spare part number 2 | 24417039 |
Last viewed
Tapered pin with female thread, unhardened ISO 8736, steel, plain, type A (ground) unhardened
Furniture handle screw
Extension for cable boxes
1/2 inch cardan joint
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
T-piece with male thread
Tapered pin with female thread, unhardened ISO 8736, steel, plain, type A (ground) unhardened
Maxilifter lever
Sandpaper strip Useit® Superpad vehicle
PinPuller® power pulling cross piece