Plastic sleeve For 1/2 inch impact socket
Plastic sleeve for 1/2 inch impact socket insert
REPLSLEV-IMPSKT-1/2IN-WS15-3PCS
Register now and access more than 125,000 products
Plastic sleeve with colour coding system
Simplifies identification of sizes and prevents wasting working time
Datasheets(X)
Suitable for width across flats | 15 mm |
Material | Plastic |
Length | 85 mm |
Sleeve inside diameter | 22.5 mm |
Sleeve outside diameter | 24.8 mm |
Colour | Grey |
Last viewed
Lightweight clamping pin
Plaster strips
Divider assortment With system boxes for system dimensions 12.6
Twist drill bit HSCo DIN 338 type RN bronze point thinning
1/2-inch impact socket wrench insert hexagon, metric, long
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Brass support sleeve
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Compri- / sealing tape
34° half-head collated nails AN