Plug-in connector CS concrete-wood/steel-wood

Name: Plug-in connector CS concrete-wood/steel-wood
Brand: Würth
SKU: 0681352510

Plug-in connector concealed wooden/concrete/steel
PLGINCON-CCEA-CONC/ST-XL55CS-29X120X250

Art.-no. 0681352510

EAN 4061975228277

All versions

Specification

Ideal for concealed or visible connections, the plug-in connectors enable a high degree of pre-fabrication and hence a considerable reduction in assembly times

The plug-in connectors each consist of two aluminium parts that can be joined for a form-fitting connection based on a classic dovetail joint. They have applications in a wide variety of areas. From timber constructions and interior fitting to wall, roof and ceiling solutions, everything is possible.

Rapid assembly of load-bearing concrete-wood/wood-steel connections

Significant reduction in assembly time due to high degree of pre-fabrication

Multiple dimensions for tailor-made and reliable solutions

Simple, continuous mounting system with identical edge clearances and non-aligned screws to maintain strength

High load transfer in and perpendicular to the direction of insertion, tension, compression and torque load transfers around all three axes

Suitable for fire protection requirements R30 and R60

Notice

The required wood dimensions can be found in the table below. The recommended cutting depth for the M series should be at least 1 mm less deep than the total thickness of both plates together, and at least 3 mm less deep for the L–XL series. Please note that longer bolts should be screwed into the end grain.

Depending on the plug-in connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values for the secondary beam (wood).

For a concrete or steel connection (main support connection), the corresponding anchors, concrete screws or steel screws must be used. These can be found in the measurement table.

Two connector plates can be secured against lifting (if required) through the use of self-tapping, locking system screws.

Utilisation classes 1 and 2 (in accordance with Eurocode 5)

Application

Application area

Load-bearing connections can be mounted easily and quickly. The different dimensions allow tailor-made, reliable solutions for all purposes. Areas of application:

Timber engineering

Carports

Staircase construction

Winter gardens

Technical information


Type description	XL 55 CS
Material	Aluminium
Length x width x height	250 x 120 x 29 mm
Min. beam cross-section of subcarrier (B/H)	140 x 280 mm
Number of screws on subcarrier/main carrier	10 / 6 PCS
Required minimum number of locking screws	2 PCS
Max. installation depth	29 mm

Plug-in connector		Geometry			Standard special system screws (in pieces)		Min. cross-section NT	Rated values R_2,d in kN
Plug-in connector		In mm			Standard special system screws (in pieces)		In mm	On wood (GL 24h) NT	Mechanical anchors, through-hole mounting for concrete C25/30
Art. no.	Type	Width	Length	Height	Required screws 6.5 x 65	Art. no.		(k_mod/Ym)¹⁾[kN]	No. of anchors	Anchor art. no.	R_2,d[kN]
0681352503	M 20 CS	60	110	20	11	0681352284	80/140	14,6	4	W-BS-SK/S 6 x 80 5929136045	14,8
0681352504	M 30 CS		150		15		80/180	19,9	6		17,9
0681352505	M 40 CS		170		17		80/200	24,9	6		19,4
Art. no.	Type	Width	Length	Height	Required screws 8 x 100	Art. no.	NT	(k_mod/Ym)¹⁾[kN]	No. of anchors	Anchor	R_2,d[kN]
0681352506	L 30 CS	80	150	29	9	0681352285	100/180	22,5	4	W-HAZ-SK/S M6-25/85 0905210202	37,1
0681352507	L 50 CS		210		13		100/240	32,4	6		46,3
0681352508	L 60 CS		250		15		100/280	41,9	6		52,5
0681352509	L 80 CS		290		17		100/320	51,3	6		58,7
Art. no.	Type	Width	Length	Height	Required screws 8 x 160	Art. no.	NT	(k_mod/Ym)¹⁾[kN]	No. of anchors	Anchor	R_2,d[kN]
0681352510	XL 55 CS	120	250	29	10	0681352286	160/280	40,7	6	W-HAZ-SK/S M6-25/85 0905210202	58,8
0681352511	XL 100 CS		370		14		160/400	67,4	8		80,2
0681352512	XL 120 CS		410		16		160/440	84,5	8		87,5
0681352513	XL 140 CS		450		18		160/480	92,9	8		92,1
0681352514	XL 190 CS		530		22		160/560	125,7	10		108,8
0681352515	XL 250 CS		610		26		160/640	157,7	10		115,1

Standard special system screws (in pieces)
Required screws 8 x 100	kN (k_mod/Ym)¹⁾[kN]	No. of anchors	Anchor art. no.	Countersunk head screw art. no.
			W-VIZ-IG/S M10x84 5916110084	0904712130
Required screws 8 x 160	kN (k_mod/Ym)¹⁾[kN]	No. of anchors		Countersunk head screw art. no.
			W-VIZ-IG/S M12x130 5916112130	0904712130