Pneumatic rod grinder RUKO 116100L, short
Pneumatic rod grinder, short, 116100L Ruko
STCKSANDR-SHORT-RUKO-116100L-G1/4ZOLL
Register now and access more than 125,000 products
The RUKO pneumatic grinder has a rubberised, non-slip handle that absorbs vibrations and prevents the device slipping in the user's hands during work. The rotation speed can be adjusted using a regulator on the top of the tool. The tool comes with a hardened-steel tool chuck. The exhaust air is discharged to the rear through the handle using a 360° rotation principle. The RUKO pneumatic grinder has an integrated air filter that protects the motor against any contaminants that may be present in the pressurised air.
Datasheets(X)
Tool holding device | 1/4 inch - 20 UNC |
Max. idle speed | 25000 rpm |
Max. drill chuck span width | 6 mm |
Min. hose inner diameter | 3/8 in |
Weight of machine | 0.57 kg |
Air consumption | 113 l/min |
Operating pressure | 6.2 bar |
Last viewed
Knurled nuts, low type DIN 467, brass, nickel-plated
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Pan head tapping screw, C shape with AW drive
Safety boots, S2
Abrasive pad
3/4 inch grooved nut wrench basic body For removal and installation work on the rear axle
Plastic expanding rivet without cap, with multiple slits
HSS Performance plain stepped twist drill bit
Hexagonal bolt
90° angled adjustable sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring