Pneumatic rod grinder RUKO 116120L, 115° angle head
Pneumatic rod grinder, 115° angle hd, 116120L Ruko
STCKSANDR-RUKO-116120L
Register now and access more than 125,000 products
The RUKO pneumatic grinder has a rubberised, non-slip handle that absorbs vibrations and prevents the device slipping in the user's hands during work. The rotation speed can be adjusted using a regulator on the top of the tool. The tool comes with a hardened-steel tool chuck. The exhaust air is discharged to the rear through the handle using a 360° rotation principle. The RUKO pneumatic grinder has an integrated air filter that protects the motor against any contaminants that may be present in the pressurised air. The 115° angle head makes working in narrow and hard-to-reach areas much easier.
Datasheets(X)
Tool holding device | 1/4 inch - 20 UNC |
Max. idle speed | 25000 rpm |
Max. drill chuck span width | 6 mm |
Min. hose inner diameter | 3/8 in |
Weight of machine | 0.70 kg |
Air consumption | 113 l/min |
Operating pressure | 6.2 bar |
Last viewed
Additional function 3KS
Adhesive sealing tape EURASOL® DUS
HSCo8 end mill, short, centre-cutting DIN 844K
Useit® Superpad wood sanding disc
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
HSCo T-slot milling cutter DIN 851AB
Craftsman's shelf cabinet
Hexagon head serrated screw with flange
Steel door spindle 9 mm with M12 threaded roller and eccentric drill hole
NP profile short cylinder In 6-pin system