Pneumatic rod grinder RUKO 116130L, long
Pneumatic rod grinder, long, 116130L Ruko
STCKSANDR-LONG-RUKO-116130L-G1/4ZOLL
Register now and access more than 125,000 products
The RUKO pneumatic grinder has a rubberised, non-slip handle that absorbs vibrations and prevents the device slipping in the user's hands during work. The rotation speed can be adjusted using a regulator on the top of the tool. The tool comes with a hardened-steel tool chuck. The exhaust air is discharged to the rear through the handle using a 360° rotation principle. The RUKO pneumatic grinder has an integrated air filter that protects the motor against any contaminants that may be present in the pressurised air. The tool extension facilitates working in narrow, hard-to-reach and low-lying areas.
Datasheets(X)
Tool holding device | 1/4 inch - 20 UNC |
Max. idle speed | 25000 rpm |
Max. drill chuck span width | 6 mm |
Min. hose inner diameter | 3/8 in |
Weight of machine | 0.90 kg |
Air consumption | 113 l/min |
Operating pressure | 6.2 bar |
Last viewed
Manual screw tap, third tap Ruko hand tap HSS DIN 352 third tap
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 10.9, plain
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
EPS profile thumbturn cylinder
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Screwdriver PH striking cap with hexagon shank
Article sticker
Safety shoe S3 Base B0978B
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, chrome-plated (F2J)
Parking sensor tool set, VW, 4 pieces