Polyester fleece adhesive tape
Polyester fleece adhesive tape
ADHTPE-FLC/PES-BLACK-19MMX10M
Register now and access more than 125,000 products
- High adhesive strength
- Ageing-resistant
- PVC-compatible
- Solvent-free
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For bundling and bandaging cable harnesses, especially with padded windings, as an alternative to foam and felt tapes when insulating and damping properties are required, and as noise, rattle and abrasion protection (e.g. in the instrument panel, vehicle interior etc.)
Width | 19 mm |
Thickness | 0.50 mm |
Min./max. temperature resistance | -40 to 105 °C |
Length | 10 m |
Colour | Black |
Min. longitudinal resistance to tearing | 30 N/cm |
Elongation at break | 10 % |
Backing material | Woven polyester fleece |
Adhesive base | Synthetic natural rubber |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Screw, flattened half round head, with collar and hexagon socket assortment 1000 pieces in system case 4.4.1. ISO 7380-2
Stud with threaded end ≈ 1.25 d for pressure container construction DIN 939, A2/70 stainless steel, plain
Jigsaw blade, wood, one star For plywood
Bodywork file blade
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain