Position screw for ISO D clamping system
Position screw for ISO D clamping system
AY-SHIMSCREW-ISO-D-CLMPSYS-FTKA0307
Register now and access more than 125,000 products
Thread type x nominal diameter | M3 |
Pitch | 0.5 mm |
Length | 7.2 mm |
Head diameter | 4.2 mm |
Internal drive | TX9 |
Drive type | Internal TX |
Countersink angle | 60 Degree |
Nominal diameter | 3 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
Cylinder head screw, aerospace NAS 1352, steel, cadmium-plated
Wallpaper stripper concentrate
Carbide multi-spur machine bit For woodworking (right-hand movement)
Hexagonal cap nut with clamping piece (non-metallic insert), fine thread
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Hexagonal bolt with flange in accordance with MBN standard
Compact workshop trolley
Safety boots, S2
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
