Pre-tensioning element For rope system

Name: Pre-tensioning element For rope system
Brand: Würth
SKU: 0838906248

Pre-tensioning elem. for rope system Universal
CLMPELMNT-C248

Art.-no. 0838906248

EAN 4062856699414

All versions

Specification

For universal safety harness system for attachment to single anchor points with DIBt National technical approval or European Technical Assessment (ETA)

Mounting on end/corner support with DIBt National technical approval or European Technical Assessment (ETA)

Continuous fall arrester on roofs and on/in buildings for ergonomic work

Reduced force transmission to the structure through defined plastic deformation of the single anchor points in the event of a fall

Resistant to corrosion and weathering: made of stainless steel (min. A2)

For 8 mm thick stainless steel wire rope (V4A)

Multi-element for precise adjustment of pre-tension in the rope system and as an additional spring-assisted damper in the event of a fall

Notice

Observe the installation instructions and approvals for the fasteners and single anchor point.

General technical approval Z-14.9-868

Also certified in accordance with DIN EN 795:2012 Type C (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415

Application

Application area

Suitable for securing up to a maximum of three persons in conjunction with fall protection PPE

Installation possible on the roof, overhead and in buildings

Installation possible on single anchor points with national technical approval, European Technical Assessment (ETA), approval in individual cases, general type approval, project-related type approval (Berlin) and measured rigid surfaces (steel, concrete components)