Precision crepe tape Strong
Precision crepe tape strong
CRPTPE-PREC-STRONG-30MMX50M
Register now and access more than 125,000 products
Extremely thin, supple and fibre-reinforced rice paper
- Reinforced fibres reduce unwanted tearing
- Brilliantly suited for both solvent- and water-based paint systems
- Enables extremely precise bonding
- Particularly fine paint edges with no running paint
- Also suitable for multi-layer painting
Special acrylate adhesive ensures higher adhesive strength and especially reliable masking
- Good adhesion and residue-free removal from most smooth, rough and uneven substrates in the automotive and construction sectors
- Also suitable for slightly damp surfaces
Outstanding UV resistance for four months, suitable for long-term bonding outdoors
Excellent strength when wet, also suitable for wet grinding
Heat resistant up to +100 °C, making it ideally suited for paintwork that requires oven drying
- Wait until the tape is dry before removing it
- Not suitable for use on carbon, zinc, lead (including lead-based paint), copper, anodised metals, natural stone (marble etc.) and aged or weathered PVC.
- Exercise caution with paints containing zinc or zinc oxide, since residues may be left.
- On "critical" substrates such as parquet, laminate, linoleum or other surfaces that will be visible later, adhesive residues or cracks in the substrate cannot be ruled out.
- When grouting tiles with sealant, the tape must be removed before the drying process is complete otherwise the tape will be difficult to remove.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Ideal for masking work in indoor and outdoor painting applications, including on slightly damp, rough or uneven surfaces For masking in glazing or smoothing techniques, as well as for attaching masking paper and cover films.
Also for masking work when painting in the automotive and metalworking sectors. Also suitable for oven drying and multi-layer painting. Also ideal as masking tape for the automotive aftermarket.
Adhesive base | Acrylate |
Adhesive tape backing material | Japanese rice paper (Washi Tape) |
Colour | Orange |
Width | 30 mm |
Length | 50 m |
Thickness | 110 µm |
Min./max. processing temperature | 5 to 40 °C |
Short term temperature resistance max. /conditions | 150 °C / short-term, one hour |
Dynamic peel strength at 25 mm | 5 N |
Elongation at break/conditions | 8 % / in accordance with DIN EN 14410 |
Resistance to tearing | 34 N/cm |
Ultraviolet resistance | 4 months, outdoor weathering |
Moisture resistance | Yes |
Shelf life from production/conditions | Unlimited / cool, dry and frost-free storage area that is protected from UV rays |
Last viewed
Hard hat SH 2000-S
Metric double box-end wrench Hexagon with POWERDRIV®
Round sling
EPS profile thumbturn cylinder
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Low-cut safety shoes, S1
Shim ring DIN 988, steel, plain
Intumescent strip dB
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Safety boots S2 Uvex1 XCraft 6815