Primer EUROBOND PRIMER PVC
Primer EURABOND PVC
PRIM-EURABOND-PVC-1LTR
Register now and access more than 125,000 products
- Improves the adhesion properties of the surface
- Coloured red - allows for better production control
- Silicone-free
In the case of new materials or applications, suitability must be confirmed by preliminary tests.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Datasheets(X)
Primer for pre-treatment of PVC-U for direct bonding of insulating glass units into the window sash before bonding with EURABOND RC (art. no. 0893 710 015), EURABOND RC EXPRESS (art. no. 0893 710 016) and/or EURABOND RC GROUND (art. no. 0893 710 017).
The pre-treatment creates a defined adhesive surface, which is fundamental for properly applied adhesives. The red colour of EURABOND PRIMER PVC makes it obvious at all times where it has been applied. This allows quality control in production.
The application surfaces must be clean, dry and free of grease. Apply the primer in one direction and as thinly as possible using the abrasive cleaning sponge while still obtaining full coverage.
Contents | 1 l |
Chemical basis | Resin |
Colour | Red |
Density/conditions | 0.94 g/cm³ / in accordance with DIN EN ISO 2811-1 |
Min. flash-off time | 1 min |
Flash-off time conditions | at 23°C and 50% relative humidity |
Min./max. processing temperature | 35 to 10 °C |
Shelf life from production/conditions | 12 Month / at 10°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Nature trousers
HSCo Multi Performance thread former DIN 2174
Wire stripping pliers AS 280
SMART STEP EU+ HSS twist drill bit DIN 338
Brother label tape cassette for labellers
Work trousers
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Shoelaces
HSCo Multi Special machine tap for blind holes DIN 376