Pro machine tap for wire thread inserts W.TEC® INSERT COIL — made of HSCo, shape B
HSCo screw tap DIN 371/376, shape B
TAP-HELCINRT-HSCO-PRO-THRGHO-M2,5X0,45
Register now and access more than 125,000 products
Datasheets(X)
Suitable for through holes
Optimum results even with hard materials
- Case-hardening steels
- Heat-treated steels up to 1000 N/mm²
- Construction steels
- Tool steels
- Cast steel up to 1000 N/mm²
- Aluminium wrought alloys
- Soft brass (MS63 long-chipping)
- Red bronze
- Stainless steels up to 1200 N/mm²
- Copper
Ideally suited for large-scale series production
The high wear resistance of the W.TEC® INSERT COIL screw tap also ensures optimum results over a long service life
Material | High-speed steel with 5% cobalt content |
Form | B |
Tolerance class | 6H modified |
Suitable for thread insert | M2,5x0,45 |
Thread diameter | 3.09 mm |
Thread length | 11 mm |
Core hole diameter | 2.6 mm |
Lead angle length | 1.8 mm |
Length | 56 mm |
Adapter type | Square-cut |
Square width | 2.7 mm |
Shank diameter | 3.5 mm |
Last viewed
Stud with threaded end ≈ 2d
Twist drill bit HSCo DIN 338 MFD Speed
Washer DIN 1440, A2 stainless steel, plain, for bolt
Rubber plate For vehicle lifting platforms
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
PRIPRESS® transition With female thread
Cylinder tapping screw, shape C with slot DIN 7971, A2 stainless steel, plain
Staples for hand-held stapler and hammer tacker
Low-cut safety shoes, S3