Pro machine tap for wire thread inserts W.TEC® INSERT COIL — made of HSCo; shape C
Screw tap DIN 371/376 HSCo, shape C
TAP-HELCINRT-HSCO-PRO-GRNDHO-M20X2,5
Register now and access more than 125,000 products
Datasheets(X)
Suitable for blind holes
Can be used for hard materials
- Case-hardening steels
- Heat-treated steels up to 1000 N/mm²
- Construction steels
- Tool steels
- Cast steel up to 1000 N/mm²
- Aluminium wrought alloys
- Soft brass (MS63 long-chipping)
- Red bronze
- Stainless steels up to 1200 N/mm²
- Copper
Ideally suited for large-scale series production
The high wear resistance of the W.TEC® INSERT COIL screw tap also ensures optimum results over a long service life
Material | High-speed steel with 5% cobalt content |
Form | C |
Tolerance class | 6H modified |
Suitable for thread insert | M20 |
Thread diameter | 23.25 mm |
Thread length | 30 mm |
Core hole diameter | 20.5 mm |
Lead angle length | 6.25 mm |
Length | 160 mm |
Adapter type | Square-cut |
Square width | 14.5 mm |
Shank diameter | 18 mm |
Last viewed
Serrated lock washer, externally serrated DIN 6798 plain bronze, shape AZ
Manual release For Compact workshop trolleys
Low-cut safety shoes, S1P
Cylindrical pin, hardened DIN 6325, steel, plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Solid carbide end mill with corner radius Speedcut-Universal, DIN 6527L, long, optional, four-lipped drill, uneven angle of twist gradient
EPS profile thumbturn cylinder
Perforated sleeve, metal for WIT injection systems
ISO insert holder with P clamping system for CN indexable inserts
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding