Pro machine tap for wire thread inserts W.TEC® INSERT COIL — made of HSCo; shape C
Screw tap DIN 371/376 HSCo, shape C
TAP-HELCINRT-HSCO-PRO-GRNDHO-M3X0,5
Register now and access more than 125,000 products
Datasheets(X)
Suitable for blind holes
Can be used for hard materials
- Case-hardening steels
- Heat-treated steels up to 1000 N/mm²
- Construction steels
- Tool steels
- Cast steel up to 1000 N/mm²
- Aluminium wrought alloys
- Soft brass (MS63 long-chipping)
- Red bronze
- Stainless steels up to 1200 N/mm²
- Copper
Ideally suited for large-scale series production
The high wear resistance of the W.TEC® INSERT COIL screw tap also ensures optimum results over a long service life
Material | High-speed steel with 5% cobalt content |
Form | C |
Tolerance class | 6H modified |
Suitable for thread insert | M3 |
Thread diameter | 3.65 mm |
Thread length | 6 mm |
Core hole diameter | 3.2 mm |
Lead angle length | 1.25 mm |
Length | 63 mm |
Adapter type | Square-cut |
Square width | 3.4 mm |
Shank diameter | 4.5 mm |
Last viewed
Locking system DUAL
Lock washer For shafts DIN 6799, phosphated steel
Panel bracket set F8 Nova Pro Scala
Heat-shrink crimp and solder connector with colour indicator HIGH-END butt connector
Hexagonal bolt with shank
Dome head solid rivet, aerospace LN 9198, aluminium
Low-cut safety shoes, S3
Work trousers
Safety boots, S2
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment