ASSY ^® 3.0 HCR chipboard screw

ASSY <SUP>®</SUP> 3.0 HCR chipboard screw - 1

ASSY <SUP>®</SUP> 3.0 HCR chipboard screw - 2

ASSY <SUP>®</SUP> 3.0 HCR chipboard screw - 3

For detailed information, other images and documents, please select individual articles from the following table.

ASSY ^® 3.0 HCR chipboard screw

Name: ASSY ® 3.0 HCR chipboard screw
Brand: Würth
SKU: 14533508070985

Especially suitable for screwing in wooden elements in aggressively corrosive environments. Material no. 1.4529

See product details

Show similar products

Available in 1 version

Show variant

Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Login/Register
Call customer service:

Variants

You can refine your search by selecting different attributes

Art.-no.

1

Exclusively for trade customers

Register now and access more than 125,000 products

Login/Register

Call customer service:

Prices for customers after login

Description
Usage

Minimal splitting effect, especially when screwing in near the edge

Tip with ring thread

Short screw-in times

Asymmetrical coarse thread

Countersunk head with AW drive

Corrosion-resistant HCR stainless steel (material no. 1.4529)

Proof of Performance

ETA-11/0190

Notice

Pre-drilling to the core diameter in solid hard woods

ASSY 3.0 chipboard screws are optimised for use in wooden materials. Use in plastic anchors may cause a reduction in the admissible load. Therefore, when using plastic anchors, we recommend only using screws without optimised thread tips (drill tip, mating thread, ring thread, serrated edge, self-clearing groove etc.), such as Würth ASSY D, prefix number 0151 (countersunk head) and prefix number 0153 (pan head).

When using these screws, the ETA-11/0190 specifications must be observed.

Available work documents:

Timber dimensioning software, load tables and detailed processing instructions can be found on the service page www.wuerth.de/assy.

Application area

ETA-11/0190

Application area

ASSY HCR 3.0 are made of highly corrosion-resistant steel, material no. 1.4529 (corrosion resistance class V, Appr. No. Z-30.3-6, suitable for use in indoor swimming pool areas) and are suitable and approved for use in the following areas:

Of ceiling and wall coverings in atmospheres containing chlorine, e.g. indoor pools (water conforming to the Drinking Water Ordinance!)

For components in stables

In woods with a high tannic acid content

Particularly good resistance to very aggressive media such as phosphoric acid, sulphuric acid and hydrochloric acid media, high resistance to pitting and stress corrosion cracking

Instructions

Screw-in angle 0° to 90°. For coniferous wood or wood-based materials made from softwood, the screw connection is made without pre-drilling. To reduce the edge distances, a pre-drilled hole can be made according to the core diameter. When screwing into hardwood, pre-drill according to ETA-11/0190.