ASSY® 3.0, blue galvanised Piano hinge screw
For detailed information, other images and documents, please select individual articles from the following table.
ASSY® 3.0, blue galvanised Piano hinge screw
Ideal for fastening attachments and piano hinges.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
Galvanised steel, blue coated, full thread, small countersunk head
Joins wood instead of splitting it
Small countersunk head 5.0 mm in diameter
- High fitting accuracy
Asymmetric thread — faster speed, high tension resistance
- Low screw-in torque
- High over-turning force
- Faster screwing than conventional particle board screws
AW drive — more power
- Optimal force transmission
- Excellent fit
- Rapid finding
- Screw settles securely
- Virtually no unscrewing of bit
- No wobbling
- No damage to surface coating of screw
Ring thread — less tendency of the wood to split, very few blow-outs
- Low splitting forces, in particular when screwing close to edges
- Reduction of screw-in torque
- Punch effect of ring thread largely prevents blow-outs
NoticeThe screws are not suitable for outdoor use and for rooms subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases. Use Würth timber construction software to measure the ASSY screws with a diameter of more than 5mm. To attach metals to wood, bradawl a precise cutout in the metal tab. ASSY 3.0 particle board screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (drilling tip, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix 0151 (countersunk head) and prefix 0153 (pan head).
ETA-11/0190
When using these screws, please follow ETA-11/0190 specifications.Application areaIdeal for fastening attachments and piano hinges.
InstructionsScrew-in angle 0° to 90°. For coniferous wood or wood-based materials made from softwood, make the fitting without a bradawl. To reduce the edge distances make a predrilled hole according to the core diameter. When screwing into hardwood, drill according to ETA-11/0190.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!