Paintable ablation coating I
The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
Paintable ablation coating I
Universally applicable, brushable ablation coating for effective protection of a wide range of media in partition systems
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Easy application: by painting, with trowel or airless spraying
- Solvent-free and halogen-free
- Resistant to moisture, for indoor and outdoor use
- Resistant to frost-thaw cycles
- Insensitive to UV radiation
- Resistant to various oils and chemicals
- Free of toxic fumes
- Mechanically resistant
Proof of Performance
ETA-17/0105 / Z-19.53-2677 / ETA-24/1113
Notice
- Storage: Protect from frost. Storage at room temperature (+5 °C to +30 °C)
- The base material must be dry and free from dust or grease
- Spray processing/airless sprayer: (Nozzle bore
0.019 inch = 0.48 mm), stir with maximum of 2 % addition of water
| Example application of ablative coating I, brushable surface coating | Application quantity [g/m2] | Coat thickness [mm] | |
| wet | dry | ||
| 2000 | approx. 1.8 | approx. 1.0 | |
| 3200 | approx. 2.9 | approx. 1.6 | |
| 4000 | approx. 3.6 | approx. 2.0 | |
| 1000 | approx. 0.9 | approx. 0.5 | |
ETA-17/0105 / Z-19.53-2677 / ETA-24/1113
Application area
For use in system [C3] + [J3]
- Combi AB soft partition
- AB joint system
- Use in system C3 as a subsequent coating component of the media/partition surface
- In system J3 as a subsequent coating component of the joint system when using mineral fibreboard, loose mineral wool or Rockwool Klimarock
- The endothermic, weather-resistant fire protection coating is particularly suitable for large-area and high-build application quantities/layers.
- Apply with brush, roller, joint knife or airless sprayer
- Ideal application at +5 °C to +30 °C and a relative humidity of less than 85 %
- Curing time of at least four hours
Instructions
- 1. Clean opening
- 2. Stir the ablation coating to a brushable consistency
- 3. Coat necessary media
- 4. Coat the partition surface/AB pre-coated mineral fibre board
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!