Ablation coating I, spreadable for use in system C3
For detailed information, other images and documents, please select individual articles from the following table.
Ablation coating I, spreadable for use in system C3
Universal paste ablation coating for sealing large openings and joints
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Solvent-free and halogen-free
- Resistant to moisture, for indoor and outdoor use
- Resistant to frost-thaw cycles
- Insensitive to UV radiation
- Resistant to various oils and chemicals
- Free of toxic fumes
- Does not affect plastics such as PE and PVC
Notice
Storage: Protect from frost. Storage at room temperature (+5 °C to +30 °C).
The base material must be dry and free from dust or grease
ETA-17/0105/Z-19.53-2677
Application area
For use in system [C3]
- Combi AB soft partition
- In system C3 as a component/adhesive between mineral fibreboard and element
- For sealing large openings and joints
- Spreadable
- Ideal application at +5 °C to +30 °C and a relative humidity of less than 85 %
- Drying time at least six hours
Instructions
- 1. Clean the component opening
- 2. Stir the ablation coating to a spreadable consistency
- 3. Use a joint knife to apply the ablation coating to the component reveal and to the cut edges of the mineral fibreboard
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!