Ablative coating I
For detailed information, other images and documents, please select individual articles from the following table.
Ablative coating I
Ablation coating for cable ducts (system B2), combi AB soft partition (system C3) and AB joint system (system C3)
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Easy to paint on or apply with a trowel
- Solvent-free and halogen-free
- Resistant to moisture, for indoor and outdoor use
- Resistant to frost-thaw cycles
- Insensitive to UV radiation
- Resistant to various oils and chemicals
- Free of toxic fumes
- Mechanically resistant
Notice
For detailed information on the cable partition, please refer to the general type approval Z-19.53-2366.
General type approval Z-19.53-2366 / general type approval Z-19.53-2677 / ETA-24/1333
Application area
- System B2 - cable ducts: Ablation coating I is used for smoke-proof sealing after configuring the cable ducts and inserting the soft foam plug
- System C3 - combi AB soft penetration seal: As a filler for sealing large openings between installations and the mineral fibreboard
- System J3 - AB joint system: Subsequent coating component of the different versions
Instructions
2 mm wet coating results in the required coating thickness of 1 mm after curing.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!