For detailed information, other images and documents, please select individual articles from the following table.
Adhesive lubricant HHS® 2020
High pressure-resistant synthesis/mineral oil with UV indicator
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Very high level of adherence
Rapid evaporation of the solvent results in immediate strong adhesion
Resistant to high pressures
Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening
Creeping properties
- Excellent lubricating properties of small tolerances
- Reliable protection against corrosion
UV indicator means application can be monitored easily
Resistant to splashes and salt water
Free from silicone, resin and acids
Resistance to high pressure loads
The HHS 2020 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend a thorough and careful pre-clean with HHS Clean prior to application, art. 089310610.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Suitable for universal lubrication of parts that are subjected to high pressure, shock and vibration, e.g. Bowden cables, deflection levers, gearshift, clutch and brake linkages, axle joints, hinges and much more.
Also suitable for use with O-ring and X-ring motorcycle chains. Ideal for avoiding cold welding on stainless steel fittings.
Shake can well before use. Thoroughly pre-clean the parts to be treated. Then spray onto the cleaned surface.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!