For detailed information, other images and documents, please select individual articles from the following table.
One piece DKOL
Compatible with DIN 2353 pipe connectors; used in pipe/tube installations
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
The one piece connector's wire ferrule is already pressed against the spindle's wire ferrule slot.
The connector is always equipped with a wire ferrule.
Please note that the one piece connector is officially approved for specific tubes only.
- Quick and easy mounting
- Always the right combination
DKO connectors have a 24° conical tightening.
- The SK connector has an external cone
- Seal with an O-ring/metal connection
DKO connectors have an M metric thread (millimetre system thread)
The one piece connector is officially approved for specific hoses only.
One piece connectors have been tested/certified for use with Bridgestone/Intertraco tubes.
The official compression dimensions are in use when the one piece connector is attached to a Bridgestone/Intertraco tube.
One piece connectors have not been tested for use with Tekno/Premier tubes.
Note the stripes on the sleeve and the type-K or type-J marking on the one piece connector.
K: Designed for a two-layer cross-fabric hose, sizes: 1/4 inch = 04 and 3/8 inch = 06.
Hoses with type-J markings can be used in both two-layer and three-layer cross-fabric hoses as well as four-layer spiral hoses. Sizes 1/2 inch = 08 to 1 1/4 inch = 20 are available.
The strength of a type-K sleeve is significantly lower than that of a type-J sleeve. Both types have their own tables that state their compression values.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!