For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- A self-cleaning, long-lasting protective coating with antibacterial and antiviral properties, free of biocides, designed to be applied to doorknobs, light switches, handrails and other small surfaces frequently touched by hand.
- Provides effective protection against enveloped viruses, bacteria, fungi and microorganisms
- The antimicrobial action is purely physical/mechanical and not due to chemical or ionic interactions.
- The antimicrobial coating does not contain biocides or nanoparticles
- Dermatologically tested product, rating "very good"
- Gentle on materials
- The effectiveness of the protection can be demonstrated by means of a UV marker
- Surface protection for up to 6 months
After use: To clear the aerosol can, hold it vertically with the valve down and press down until only the propellant starts to come out. The clogged nozzle should be removed from the can and unclogged using a needle. Please note that the application of the coating may affect the appearance of the surface. The antimicrobial effect has been confirmed by independent testing laboratories: 99.99% efficacy against Gram-positive and Gram-negative bacteria (tests according to JIS Z 2801 / ISO 22196 against Staphylococcus aureus, MRSA, E. coli). Efficacy of 99.99% against enveloped viruses (performance confirmed within 8 hours according to the S2 screening test based on RKI [1995] guidelines and ISO 21702:2019 standard against coronaviruses).
The antimicrobial action is purely physical and not due to chemical or ionic interactions. The antimicrobial coating does not contain biocides or nanoparticles.
The application instructions are recommendations based on tests carried out and our experience. We recommend performing your own tests before you use the product. Due to the wide variety of applications and storage methods and conditions of use, we cannot accept liability for the results of use for a specific application. Our customer service department makes technical information or advice available free of charge; however, these services are provided without liability unless the information is provided under a concluded contract or the consultant is acting for a specific purpose. We ensure the consistent quality of our products. We reserve the right to make technical changes and to upgrade our products. Follow the recommendations on the technical data sheet!
- For doorknobs, light switches, handrails and other small surfaces frequently touched by hand
- Contents sufficient for approx. 100-125 handles or light switches
The surface must be clean, dry and free of oil, silicone and grease. Not suitable for glass, rubber and PVC-based synthetic leather. Surfaces, which should not be sprayed, should be properly covered. Shake the can vigorously before use. With aerosol. Spray vertically, applying two to three thin, even coats from a distance of approximately 15-20 cm. Drying time (dry): approx. 4-6 hours depending on the surface (at room temperature). The antimicrobial action is verifiable using a UV lamp (395 nm), both during application and at a later stage. Keep surfaces clean after application. Use pH-neutral cleaning agents.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!