Welcome to Würth Aerospace Solutions For trade customers only
Double-layer base coat
Double-layer base coat - 1
Double-layer base coat - 2
Double-layer base coat - 3

For detailed information, other images and documents, please select individual articles from the following table.

Double-layer base coat

High-solid, quick-drying, high-coverage base coat

See product details

Available in 1 version

Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Variants

Exclusively for trade customers

Register now and access more than 125,000 products

Call customer service:

Prices for customers after login

  • Quick and easy to apply

  • No clouding

  • Good coverage

  • Quick to dry

  • Brilliant effects

  • Solids content of base material in %: 31.8

  • Mixture by volume: 2:1 with acrylic thinner

  • Application equipment: Paint gun, minimum nozzle size 1.3 mm.

  • Available colours: refer to index list (+ effect colours, metallic, solid)
Notice

Protect from frost. Check the colour prior to application. The substrate must have the correct pre-treatment depending on the substrate. The use of a suitable pre-cleaner or a pre-coat is recommended in special cases. For further information, please refer to the technical data sheet. In accordance with German regulation ChemVOC FarbV dated 16/12/2004, this product may not be used for repairing vehicle paintwork or for coating structures, their components or decorative elements! Tip for pros! Can be painted over wet-on-wet in two spraying passes with intermediate flash-off time of 2-5 minutes. Important! Specify the colour with RAL or original colour number in item-related text! Your order cannot be processed without this information.

Application method
Pressure [bar]Nozzle [mm]Spray passesThinner
Air/flow cup3-41.2-1.42-350 %
HVLP21.2-1.42-350 %
Brush on/roll on
Airless

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.