Welcome to Würth Aerospace Solutions For trade customers only
Drill set 19 pieces, for steel and aluminium four-link axles
Drill set 19 pieces, for steel and aluminium four-link axles - 1
Drill set 19 pieces, for steel and aluminium four-link axles - 2
Drill set 19 pieces, for steel and aluminium four-link axles - 3
Drill set 19 pieces, for steel and aluminium four-link axles - 4
Drill set 19 pieces, for steel and aluminium four-link axles - 5
Drill set 19 pieces, for steel and aluminium four-link axles - 6
Drill set 19 pieces, for steel and aluminium four-link axles - 7
Drill set 19 pieces, for steel and aluminium four-link axles - 8

For detailed information, other images and documents, please select individual articles from the following table.

Drill set 19 pieces, for steel and aluminium four-link axles

This new tool set allows any extremely tightly seized clamping screws on VAG four-link axles to be effortlessly removed.

See product details

Available in 1 version

Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Variants

Exclusively for trade customers

Register now and access more than 125,000 products

Call customer service:

Prices for customers after login

  • The different components enable damage-free removal, regardless of the mounting position of the steering gearbox (top/bottom) and no matter which direction the screw sits in the clamping hole.

  • Three drilling jigs ensure marking and drilling is exactly central, while the clamping screw quality is no problem for the special HSS TIN or TICN drill.

  • No compressing and/or deformation of the clamping screw

  • No breakage of the expensive axle body

  • Easy to use

  • No space problems

  • Quick removal


Scope of delivery:


  • 1 x drill bit, Ø4.5 mm x L=140 mm

  • 1 x drilling jig for thread side, Ø4.5 mm

  • 1 x drill bit, Ø7.3 mm x L=110 mm

  • 1 x drilling jig for thread side, Ø7.3 mm

  • 1 x drill bit, short, Ø4.5 mm x L=80 mm

  • 1 x drilling jig for hex head

  • 1 x stepped drill bit TICN

  • 1 x drive out mandrel for pneumatic chipping hammer

  • 1 x press out mandrel for pressing bracket

  • 2 x spacer plate 3.6 mm

  • 2 x spacer plate 4.0 mm

  • 2 x machine nuts M10 with collar

  • 4 x stainless steel A2 washers M10