Shopping basket0

Product categories Machining Milling End mill metal solid carbide

End mill solid carbide

Top seller

Filters

25 articles with 322 variations found

End mill SC DIN 6527L Z3-4 2xD type HR TiAlN HB

End mill SC DIN 6527L Z3-4 2xD type HR TiAlN HB

With reinforced shank. Universal range of applications for materials of medium to high strength (approx. 900–1,400 N/mm²). E.g. case-hardened steels, tempering steels, tool steel (alloyed/tempered), non-ferrous metals, highly heat-resistant materials and cast irons and cast alloys.

9 variations

Show variations

End mill MTC DIN 6527L Z4-5 45° type HR TiAlN-S HB

End mill MTC DIN 6527L Z4-5 45° type HR TiAlN-S HB

Particularly suitable for steel materials from 500-1,400 N/mm², stainless steels, grey cast iron and titanium. High cutting performance with low driving power = MTC.

6 variations

Show variations

E.mill SC alu WN-XXL Z3 6xD/2xD W 34-38° HA

E.mill SC alu WN-XXL Z3 6xD/2xD W 34-38° HA

Particularly suitable for machining aluminium materials (both for cast and wrought alloys). Core increase for greater stability, optimal chip outflow owing to enhanced production grinding procedure for an extremely smooth surface. Maximum cutting volumes and optimal surface quality owing to unique cutter geometry.

9 variations

Show variations

End mill SC WN Z2 30° 2xD type N HA

End mill SC WN Z2 30° 2xD type N HA

Recommended for milling materials of average to high strength. Drilling to full depth and straight milling with precision clearances.

11 variations

Show variations

End mill solid carbide WN Z3 2xD 30° type N HA

End mill solid carbide WN Z3 2xD 30° type N HA

Recommended for milling materials of average to high strength. Milling of grooves with greater drill depth, precision clearances, suitable for both front and circumferential milling. High cutting performance and excellent smooth running produce optimal surface quality.

11 variations

Show variations

End mill SC WN-K Z4 2xD 30° type N

End mill SC WN-K Z4 2xD 30° type N

Recommended for milling materials of average to high strength. Milling of grooves with greater drill depth, precision clearances, suitable for both front and circumferential milling. High cutting performance and excellent smooth running produce optimal surface quality.

19 variations

Show variations

End mill SC WN-K Z4 2xD 30° type N TiAlN

End mill SC WN-K Z4 2xD 30° type N TiAlN

Recommended for milling materials of average to high strength. Milling of grooves with greater drill depth, precision clearances, suitable for both front and circumferential milling. High cutting performance and excellent smooth running produce optimal surface quality.

19 variations

Show variations

End mill SC WN-L Z4 5xD 30° type N TiAlN

End mill SC WN-L Z4 5xD 30° type N TiAlN

For finishing steels of medium to high strength (construction steels, case-hardened steels, tempering steels), non-ferrous metals, rust and acid-resistant steels with high cutting performance yet excellent surface properties. Especially for synchronous milling.

18 variations

Show variations

End mill SC WN-K Z3 2xD 30° type N

End mill SC WN-K Z3 2xD 30° type N

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

19 variations

Show variations

End mill SC WN-K Z3 2xD 30° type N TiAlN

End mill SC WN-K Z3 2xD 30° type N TiAlN

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

19 variations

Show variations

End mill SC WN-L Z3 5xD 30° type N

End mill SC WN-L Z3 5xD 30° type N

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

11 variations

Show variations

End mill SC WN-L Z3 5xD 30° type N TiAlN

End mill SC WN-L Z3 5xD 30° type N TiAlN

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

8 variations

Show variations

End mill SC DIN 6527L Z3 2xD 30° type N TiAlN HB

End mill SC DIN 6527L Z3 2xD 30° type N TiAlN HB

Recommended for milling materials of average to high strength. Milling of grooves with greater drill depth, precision clearances, suitable for both front and circumferential milling. High cutting performance and excellent smooth running produce optimal surface quality.

15 variations

Show variations

End mill SC DIN 6527L Z4 2xD 30° type N TiAlN HB

End mill SC DIN 6527L Z4 2xD 30° type N TiAlN HB

For finishing steels of medium to high strength (construction steels, case-hardened steels, tempering steels), non-ferrous metals, rust and acid-resistant steels with high cutting performance yet excellent surface properties. Especially for synchronous milling.

23 variations

Show variations

End mill SC DIN6527L SK Z4 30° 2xD type N TiAlN

End mill SC DIN6527L SK Z4 30° 2xD type N TiAlN

For finishing steels of medium to high strength (construction steels, case-hardened steels, tempering steels), non-ferrous metals, rust and acid-resistant steels with high cutting performance yet excellent surface properties. Especially for synchronous milling.

9 variations

Show variations

End mill DIN 6527L Z3-4 20° HR TiAlN-S HB

End mill DIN 6527L Z3-4 20° HR TiAlN-S HB

Particularly suitable for all steel materials up to 1,400 N/mm², higher-strength stainless steels, grey cast iron and short-chipping aluminium materials and cast aluminium. High cutting performance.

9 variations

Show variations

End mill SC WN Z3 2xD 30° type N HA TiAIN

End mill SC WN Z3 2xD 30° type N HA TiAIN

Recommended for milling materials of average to high strength. Milling of grooves with greater drill depth, precision clearances, suitable for both front and circumferential milling. High cutting performance and excellent smooth running produce optimal surface quality.

11 variations

Show variations

Mini end mill SC WN-K Z2 3xD 30° type N HA

Mini end mill SC WN-K Z2 3xD 30° type N HA

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and subsequent straight milling, particularly suitable for contour milling.

11 variations

Show variations

Mini end mill SC WN-L Z3 4xD 30° type N TiAIN HA

Mini end mill SC WN-L Z3 4xD 30° type N TiAIN HA

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and subsequent straight milling, particularly suitable for contour milling.

5 variations

Show variations

Mini End mill SC HSC WN Z2 1.5xD/10xD 30° TiAlN HA

Mini End mill SC HSC WN Z2 1.5xD/10xD 30° TiAlN HA

Recommended for milling materials of medium and high strength and for HSC machining.

15 variations

Show variations

End mill SC WN Z4 2xD 30° type N HA TiAlN

End mill SC WN Z4 2xD 30° type N HA TiAlN

Recommended for cutting medium to high-strength materials. For cutting grooves with deeper drilling depth, precision clearances, also suitable for end and circumference milling. High machining output and very smooth running result in excellent surface finishes.

11 variations

Show variations

End mill SC WN-K Z2 2xD 30° type N

End mill SC WN-K Z2 2xD 30° type N

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

19 variations

Show variations

End mill SC WN-K Z2 2xD 30° type N TiAlN

End mill SC WN-K Z2 2xD 30° type N TiAlN

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

19 variations

Show variations

End mill SC WN-L Z2 5xD 30° type N

End mill SC WN-L Z2 5xD 30° type N

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

8 variations

Show variations

End mill SC WN-L Z2 5xD 30° type N TiAlN

End mill SC WN-L Z2 5xD 30° type N TiAlN

Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.

8 variations

Show variations

Hide details Show details Privacy policy Cookies Disclaimer GTC